Select language: De En

Navigate here:


Content:

Insulation underlays

Products


pur 2.0

Description

This professional acoustic mat consists of mineral fillers and polyurethane binders. Pur 2.0 comes with walking sound reduction, low thermal resistance as well as integrated moisture protection are also impressive feautures.

Suitable for

Technical Data

Item No.: 98571
Dimensions: 1 x 7.5 m = 7.5 m²
Thickness: 2 mm
Thermal resistance: 0.010 m² K/W
Walking sound reduction: 26%
Impact sound reduction: 18 dB
Load:250 kPa
Uneven floor: 1.12 mm
Moisture protection: > 75 m


wood 5.0

Description

The wood fibre sound insulation panels are limited intended for use with underfloor heating for warmth insulation (R- Value for the total floor construction < 0,15 m² K /W). It is therefore unsuitable for rooms with underfloor heating. Because of its high wood content, a PE foil must be laid underneath for moisture protection when installing on a mineral subfloor.

Suitable for

Technical Data

Item No.: 90171
Dimensions: 0.79 x 0.59 m x 15 = 7 m²
Thickness: 5 mm
Thermal resistance: 0.100 m² K/W
Walking sound reduction: -
Impact sound reduction: 19 dB
Load: ≥ 150 kPa
Uneven floor: 2.0 mm
Moisture protection: 0.03 m


xps 5.0

Description

This 5 mm thick panel made of extruded polystyrene has the best insulating features and impact sound within the add2 range. Irregularities in the sub-floor of up to 4 mm can readily be evened out.

Suitable for

Technical Data

Item No.: 98531
Dimensions: 0.79 x 0.59 m x 15 = 7 m²
Thickness: 5 mm
Thermal resistance: 0.18 m² K/W
Walking sound reduction: 9 %
Impact sound reduction: 22 dB
Load: 90 kPa
Uneven floor: 4.0 mm
Moisture protection: -

xps 2.2 Alu

Description

The 2.2 mm thin foldable matt is easy and quick to lay out due to its bonded aluminium layer and the integrated adhesive tape.

Suitable for

Technical Data

Item No.: 98515
Dimensions: 1.2 x 12.5 m = 15 m²
Thickness: 2.2 mm
Thermal resistance: 0.07 m² K/W
Walking sound reduction: -
Impact sound reduction: 20 dB
Load: ≥ 90 kPa
Uneven floor: 1.0 mm
Moisture protection:≥ 100 m

pe 2.0 alu

Description

The PE foam with its bonded aluminium layer. It features a self-adhesive overlap.

Suitable for

Technical Data

Item No.: 98161
Dimensions: 1 x 12.5 = 12.5 m²
Thickness: 2 mm
Thermal resistance: 0.039 m² K/W
Walking sound reduction: -
Impact sound reduction: 17 dB
Load: ≥ 2 kPa
Uneven floor: 1.0 mm
Moisture protection: > 100 m

 


pe 2.0

Description

The 2 mm thick PE foam is the most cost-effective option. Due to its low thickness, the foam is often used for remodelling work.

Suitable for

Technical Data

Item No.:90151
Dimensions:1 x 25 m = 25 m²
Thickness: 2 mm
Thermal resistance: 0.044 m² K/W
Walking sound reduction: -
Impact sound reduction: 19 dB
Load: ≥ 8 kPa
Uneven floor: 1.0 mm
Moisture protection: -


pe-folie

Description

PE sheet must be used as a moisture barrier, especially when laying flooring on new subfloors where residual damp will be present and where there are large temperature differences with the rooms below. It prevents rising damp from damaging the laminate flooring.

Suitable for

Technical Data

Item No.: 98111
Dimensions: 2 x 7,5 m = 15 m2
Thickness: 200 μm
Thermal resistance: -
Walking sound reduction: -
Impact sound reduction: -
Load: -
Moisture protection: > 100m

Please note! Please ensure that the subfloor has been properly prepared before rolling out the underlay. When laying flooring in rooms with underfloor heating, we strongly recommend that you use our PE steam brake. If stored for longer periods, the parquet underlay must be kept in cool, dry conditions and protected from sunlight.